Technical pro’s Bass1822 speaker is a powerful mix of clear sound, stable controls, and raw wattage – peaking at around 2,000 watts of power. Whether you need a professional sound for your speaker system or simply have more advanced musical tastes, the Bass1822 is a perfect way to mix both power and clarity to achieve a sound that fills every room it’s in with vivid, natural sound.
With four inputs including 1/4″ and XLR inputs, not to mention 8 different outputs – 4 passive and 4 powered – there’s no doubt that the Bass1822 delivers a professional-quality sound concurrent with the best technology you want to throw at it. A single pole mount and two integral carry handles also make moving this sound system a breeze.
The Bass1822 ABS Molded 18” Powered subwoofer was designed to provide deep and rich bass tones for BIG ROOM SOUND! Using the same professional technology that is aligned with all of Technical Pro’s products the Bass1822 is built with superior technology housed in a long lasting and sturdy design. This speaker will satisfy all of your big room needs…if you are setting up a large sound system and are looking to achieve the low and deep driving bass sound that your audience demands, the Bass1822 is a must have for any venue or performance space!
If you are a DJ and are looking for that extra “umph” in your music or you are setting up a venue or club setting and are lacking that thick low end sound, you need a sub-woofer! Pushing out a total power of 2000 watts with a 18” speaker, 90oz. magnet and 3” voice coil the Bass1822 has enough power to properly translate your low frequency audio to virtually any room or venue! The outside design is a plain black design that can easily be placed in the shadows or out of sight from your audience. Low frequency audio travels in all directions. Scientifically, this means that you can place the sub woofer on any place on the ground in your venue and achieve the same overall bass sound throughout your entire room!
OPTIONS!!! The Bass1822 boasts a lot of very valuable options with respect to setting up your sound system. This speaker is powered and therefore does not require an amplifier. The amp is built in! The inputs consist of 2 XLR and 2 1/4” slots. This speaker has 2 1/4” and 2 XLR Passive outputs and 2 speakon and 2 banana binding post Powered outputs. You can use the passive outputs to send your signal to another amplifier and you can use the powered outputs to send your signal to a speaker while also using the Bass1822 to power that speaker. These are the type of options you need for a professional live sound setup!
Located on the back panel are separate volume, balance, and low pass controls. Also located on the back is a switchable satellite high pass filter. This feature will allow the high frequencies to pass through to the satellite speakers…that will push out the mid and high frequencies. This is a very good option to have in a professional sound set up. This and all of the features will send the correct frequencies to the optimal speakers for a clear, big sounding translation! If you need to add a professional subwoofer to your sound set up, the Bass1822 is one of the best choices on the market and at a price that is almost too low to believe!
Frequency Response: 30Hz-300Hz
Impedence: 8 ohms
- 90 oz. magnet
- 2000 watts peak power
- Inputs: 1/4”(2), XLR (2)
- Passive Outputs: 1/4”(2), XLR (2)
- Powered Outputs: Speakon (2) Banana Post (2)
- Woofer: 18”, 90 oz. Magnet, 3” Voice coil
- Separate volume and low pass filter controls for sub
- Separate volume and balance controls for sub
- Switchable Satellite high pass filter
- Single pole mount, 2 Integral carry handles
- Frequency Response: 30Hz-300Hz
- Sensitivity:102 ±2dB
- Impedence: 8 ohms
- 110-220V switchable
- Dimensions: 29.7”w x 27.7”h x 24.6”d
- Weight: 70 lbs
- MSRP: $699.00